English
Suomi
Eesti
Latviešu
Fyne Audio F300 series
200 YEARS’ EXPERIENCE.
Scottish-based loudspeaker manufacturer, FYNE AUDIO, is brand new. But the 7-strong management team brings an enviable pedigree of over 200 years’ audio industry experience. Additionally, a recruitment programme is underway to bring in even more industry talent. We are seeking more team players with the passion and creative skills to help achieve our goal of designing and manufacturing an exceptional range of high performance loudspeakers.
F300 FAMILY
MEET THE F300 SERIES
The price may be entry level but the F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and audiophile performance unrivalled at its price, the line-up provides versatility for music lovers or movie enthusiasts. With a choice of two bookshelf or stand-mount models, two floorstanders, a centre channel and dipole speaker, there are plenty of options to suit a wide variety of listening environments.
CABINET
A well-constructed cabinet is the starting point for any high-performance loudspeaker. Exceptional rigidity is provided on all F300 models through a combination of MDF panels which are cross-braced internally. Additional stiffness is achieved by coupling the low frequency driver’s magnet to the cabinet bracing using a resonant-absorbing mastic. Widening the footprint on the floor standing models, using a plinth with floor coupling spikes, provides stability for tight bass and accurate stereo imaging.
CROSSOVER
Optimal performance of each of the F300 models is assured by using high quality precision components within the crossover, including low loss LF laminated core inductor and HF polypropylene capacitors. Although the designs are computer optimised, fine-tuning is always undertaken through critical auditioning. The gold-plated speaker terminals ensure a clean signal path and the top of the range F303 has bi-wire terminals fitted to further enhance performance.
DRIVER TECHNOLOGY
Fyne Audio aims to provide best in class performance at all price levels and the careful component selection for the F300 drivers helps to meet this goal.
Utilising a multifibre paper cone on the bass / midrange drivers delivers a natural sounding midrange and clean transient behaviour.
Fitted to the centre of the driver is a phase plug which provides smooth midrange roll-off characteristics. FyneFluteTM technology, used on the driver’s roll rubber surround, provides a non-homogeneous interface which very effectively terminates cone energy.
TWEETER
The tweeter combines a powerful Neodymium magnet system with a 25mm Polyester dome producing crisp and controlled high frequency detail. Integrated within the protective mesh cover is a phase loss compensator which delays the output from specific areas of the dome to give a smooth and extended response.
WE MAY BE A NEW NAME IN AUDIO BUT…
When you invest in a pair of FYNE AUDIO loudspeakers, you’ll be pleased to know that the development of each product has been undertaken by an enthusiastic and experienced team who have been in the loudspeaker business for very many years. At every level of the design process, be it acoustic know-how, mechanical engineering, choice of materials or manufacturing expertise, our loudspeakers have been tuned to offer best in class performance.
F300 FAMILY
The price may be entry level but the F300 range benefits from the very best technical and acoustic expertise in the loudspeaker industry. Offering a scale of specification and audiophile performance unrivalled at its price, the line-up provides versatility for music lovers or movie enthusiasts. With a choice of two bookshelf or stand-mount models, two floorstanders, a centre channel and dipole speaker, there are plenty of options to suit a wide variety of listening environments.
PRODUCT DESCRIPTION
Packing a punch well beyond its diminutive size the versatile F300 can be used for two channel or multichannel applications. Pre-fitted to the rear panel of the F300 is a bracket allowing the speaker to be easily flush-mounted to a wall. This is a really handy feature where space is at an absolute premium, or for using the speaker as a rear effects speaker in home cinema set up.
PRODUCT SPECIFICATIONS
System Type
Recommended amplifier power (Watt RMS)
Continuous power handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m)
Nominal impedance
Frequency response (-6dB typical in room)
Drive unit complement
Crossover frequency
Crossover type
Dimensions – HxWxD
Weight – Each
Finishes
2 way, rear ported
20 W – 70 W RMS
35 W RMS
87dB
8 Ohm
54 Hz – 28 kHz
1 x 125mm multi-fibre bass
1 x 25 mm polyester dome tweeter
3.4 kHz
12 dB/oct low pass, 18 dB/oct high pass
250 mm x 156 mm x 211 mm (HxWxD)
3.7kg
Walnut / Black Ash / Light Oak
PRODUCT DESCRIPTION
The F300C is a dedicated centre channel loudspeaker voice matched to other models in the F300 range, delivering crystal clear dialogue and focused central vocals for multichannel music and home theatre applications.
Compact enough to fit into a variety of TV cabinets yet potent enough to match even the impressive F303 floorstander, this landscape loudspeaker packs two 125mm (5″) mid / bass drivers and a 25mm (1″) polyester dome tweeter in a rear-ported 6.2 litre cabinet.
PRODUCT SPECIFICATIONS
System Type
Recommended amplifier power (Watt RMS)
Continuous power handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m)
Nominal impedance
Frequency response (-6dB typical in room)
Drive unit complement
Crossover frequency
Crossover type
Dimensions – HxWxD
Weight – Each
Finishes
2 way, rear ported
25 W – 100 W RMS
50 W RMS
87dB (2.83 Volt @ 1m)
8 Ohm
65 Hz – 28 kHz
2 x 125mm multi-fibre bass
1 x 25 mm polyester dome tweeter
3.4 kHz
12 dB/oct low pass, 18 dB/oct high pass
250 mm x 156 mm x 211 mm
5.5kg
Walnut / Black Ash / Light Oak
PRODUCT DESCRIPTION
Perfect for smaller listening rooms, the F301 is a compact, stand-mount or bookshelf loudspeaker offering outstanding flexibility and class leading performance. As a front stereo pair, the F301 excels at delivering dynamic bass and the musical articulation of more expensive designs. Its high current handling is equally at home in home theatre systems where the F301’s easy to drive nature and deep bass punch are compatible with a wide range of AV amplifiers and receivers.
PRODUCT SPECIFICATIONS
System Type
Recommended amplifier power (Watt RMS)
Continuous power handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m)
Nominal impedance
Frequency response (-6dB typical in room)
Drive unit complement
Crossover frequency
Crossover type
Dimensions – HxWxD
Weight – Each
Finishes
2 way, rear ported
25 W – 100 W RMS
50 W RMS
89dB (2.83 Volt @ 1m)
8 Ohm
44 Hz – 28 kHz
1 x 150 mm multi-fibre bass
1 x 25 mm polyester dome tweeter
3.2 kHz
12 dB/oct low pass, 18 dB/oct high pass
300 mm x 190 mm x 271 mm
5.3kg
Walnut / Black Ash / Light Oak
PRODUCT DESCRIPTION
Taking the performance characteristic of its sibling F301 bookshelf design, the floorstanding F302, with its increased cabinet volume, takes the music listening experience to an altogether more dynamic level. The enhanced depth of bass will be appreciated even if listening to the speaker at relatively low volume levels. And the increased power handling capacity ensures that our What HiFi 5 Star F302 won’t suffer from musical compression or distortion for those times when you just have to turn up the volume.
PRODUCT SPECIFICATIONS
System Type
Recommended amplifier power (Watt RMS)
Continuous power handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m)
Nominal impedance
Frequency response (-6dB typical in room)
Drive unit complement
Crossover frequency
Crossover type
Dimensions – HxWxD
Weight – Each
Finishes
2 way, rear ported
30 W – 120 W RMS
60 W RMS
90dB (2.83 Volt @ 1m)
8 Ohm
36 Hz – 28 kHz
1 x 150 mm multi-fibre bass
1 x 25 mm polyester dome tweeter
3.2 kHz
12 dB/oct low pass, 18 dB/oct high pass
932 mm x 190 mm x 271 mm
13.3kg
Walnut / Black Ash / Light Oak
PRODUCT DESCRIPTION
The flagship of the F300 series is an impressive floor standing loudspeaker capable of huge scale dynamics and highly detailed top end articulation. Featuring two potent 150mm (6”) mid/bass drivers, and a 25mm polyester dome tweeter delivering an authoritative performance with power and passion. High output levels and an easy to drive load make the F303 suitable for a wide range of home entertainment amplifiers and applications.
Employing a D’Appolito driver configuration, positioning the tweeter centrally between the two bass / midrange drivers, provides a smooth dispersion characteristic through the critical crossover region. The sweet spot is widened, resulting in enhanced musical performance on or off the loudspeaker’s main axis.
PRODUCT SPECIFICATIONS
System Type
Recommended amplifier power (Watt RMS)
Continuous power handling (Watt RMS)
Sensitivity (2.83 Volt @ 1m)
Nominal impedance
Frequency response (-6dB typical in room)
Drive unit complement
Crossover frequency
Crossover type
Dimensions – HxWxD
Weight – Each
Finishes
2 way, rear ported
35 W – 150 W RMS
75 W RMS
91dB (2.83 Volt @ 1m)
8 Ohm
32 Hz – 28 kHz
2 x 150 mm multi-fibre bass
1 x 25 mm polyester dome tweeter
3.2 kHz
12 dB/oct low pass, 18 dB/oct high pass
962 mm x 190 mm x 271 mm
14.6kg
Walnut / Black Ash / Light Oak
seastone.audio