SPL Audio Performer m1000

The Performer m1000 is the big brother of the highly acclaimed Performer s800. Built as a mono block it features SPL’s proprietary VOLTAiR technology that allows creating power amps with far less components in the signal path than common designs. Only one preamplifier op-amp is required to drive the bipolar power amplifier transistors: extremely fast, direct, highly efficient and with an extraordinary sound. The Performer m1000 delivers 1000 W into 2 ohms or 750 W into 4 ohms out of a linear power supply with a massive toroidal transformer.

 

The Performer m1000 amplifier is an ultra-compact power amplifier. Thanks to the VOLTAiR technology this power amplifier has absolute control over the speakers up to their load limits. Designed as a mono block amplifier this bi-polar transistor power amplifier delivers up to 1000 W into 2 ohms, 750 W into a 4 ohms and 420 W into 8 ohms speaker.

Specifications

Line Inputs & Line Outputs

  • Neutrik XLR, balanced, Pin 2 = (+)
  • Input impedance: 10 kohms
  • Input trimming: 0 dB to -5.5 dB in 0.5 dB steps
  • Input sensitivity: +6 dBu
  • Output impedance: defined by connected device

Loudspeaker Outputs

  • One pair binding posts with ø4mm cable hole (screwable) and banana plug

Output power

  • 1000 W RMS into 2 ohms
  • 750 W RMS into 4 ohms
  • 420 W RMS into 8 ohms

Output voltage

  • 180 V Peak-to-Peak
  • 64,6 V RMS

Output impedance

  • < 0.031, 20 Hz to 20 kHz

Damping factor

  • > 280, at 1 kHz and 8 ohms

Frequency response

  • 10 Hz to 80 kHz

Signal-to-noise ratio

  • > 118 dB (wide-band, unweighted, referred to full power output)
  • > 123 dB (A-weighted)

Gain

  • 26 dB

Total harmonic distortion

  • < 0.03 % at 1 kHz, at 420 W, 8 ohms
  • < 0.05 % at 1 kHz, at 750 W, 4 ohms
  • < 0.08 % at 1 kHz, at 1000 W, 2 ohms

Internal Operating Voltage

  • +/- 60 V

Power Supply

  • Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
  • Fuses: 230 V: T 6.3 A; 115 V: T 12 A
  • Power consumption: max 1370 VA
  • Idle power consumption: 50 W
  • Stand-by power consumption: 0,3 W

Dimensions (incl. feet)

  • 278 mm W x 205 mm H x 375 mm D
  • 10.95″ W x 8.07″ H x 14.76″ D

Weight

  • 24.8 kg; 54.7 lbs (unit only)
  • 29.3 kg; 64.6 lbs (shipping)