SLide one
SLide one
SLide one
SLide one
SLide one
SLide one
previous arrow
next arrow

Mipro ACT-312 UHF Analog Dual-Channel Receiver

 

  • EIA standard metal chassis equipped with a green backlit LCD screen and electronic buttons on the front panel. The LCD screen will automatically turn bright to identify “Working” or “Standby” mode.
  • The most reliable 24 MHz narrowband high dynamic range receiving circuit greatly decreases intermodulation distortion and increases interference-free compatible channels.
  • Industry’s first “PiloTone & NoiseLock” circuits and the RF interference warning indicator for proper adjustments of the SQ level to avoid interference.
  • MIPRO Auto Scan and ACT™ function provides the transmitter’s frequency with precise and rapid sync to the receiver.
  • There are 7 preset groups with a total of 80 pre-saved frequencies. The user-defined group allows users to choose 8 working channels from 961 available frequencies.
  • Each channel has separate audio output and 3 switchable output gains, or mix signals from all channels with just one output jack. All is to ensure the microphone operates within proper sensitivity and dynamic range, free from distortion.
  • Antenna connector provides bias for MIPRO antenna systems to boost reception distance and signal.
  • External AC 100 – 240 V switching power supply to ensure stable operation of the system even under drastic voltage change.
  • All are designed and made in Taiwan to ensure high quality and value.
Model ACT-312
Name UHF Analog Dual-Channel Receiver
Channel Dual
Chassis EIA standard half-rack (9.5″) metal chassis
Frequency Range UHF 480 – 934 MHz (country dependent)
Bandwidth 24 MHz
Receiving Mode Diversity receiving
Sensitivity 10 dBμV @ S/N > 80 dB
Frequency Response 50 Hz – 18 kHz
Dynamic Range > 106 dBA
Audio Output Balanced: +16 dB / 0 dB / -6 dB, Unbalanced: +10 dB / 0 dB / -6 dB
Antenna 50Ω TNC female connector provides bias for the MIPRO antenna systems
Power Supply DC 12 – 15 V. External AC 100 – 240 V switching power supply
Dimensions 210 × 44 × 165 mm (W × H × D)
Weight Approx. 0.9 kg
Note Refer to the actual product in the event of product discrepancy

ACT-32H – ACT-32HC – ACT-32T – ACT-32TC – BC-100T

AD-708 – AD-707a – AT-70W – AT-90W – AT-100 – FB-10 – FB-70 – FBC-71